================================================================================
                                样例使用说明
                                Sample Description
================================================================================
功能描述：
此样例演示了TIM1的输出比较功能，配置PA5作为输出比较引脚，PA5输出的信号1ms翻转一
次电平。

Function descriptions:
This sample demonstrates the output comparison function of TIM1, configuring PA5
as the output comparison pin, and the signal output from PA5 flips the level once
in 1ms.
================================================================================
测试环境：
测试用板：MS32C001B_STK
MDK版本： 5.28
IAR版本： 9.20
GCC 版本：GNU Arm Embedded Toolchain 10.3-2021.10

Test environment:
Test board: MS32C001B_STK
MDK Version: 5.28
IAR Version: 9.20
GCC Version: GNU Arm Embedded Toolchain 10.3-2021.10
================================================================================
使用步骤：
1. 编译下载程序到MCU，并运行
2. PA5输出翻转的电平信号，信号1ms翻转一次电平。

Example execution steps:
1 Compile and download the program to MCU and run it
2.PA5 output flip-flop level signal, signal 1ms flip-flop level once
================================================================================
注意事项：

Notes:

================================================================================