================================================================================
                                样例使用说明
                                Sample Description
================================================================================
功能描述：
此样例演示了时钟输出功能，可输出HSE波形。

Function descriptions:
This sample demonstrates the clock output function, which can output HSE 
waveforms.
================================================================================
测试环境：
测试用板：MS32C001B_STK
MDK版本： 5.28
IAR版本： 9.20
GCC 版本：GNU Arm Embedded Toolchain 10.3-2021.10

Test environment:
Test board: MS32C001B_STK
MDK Version: 5.28
IAR Version: 9.20
GCC Version: GNU Arm Embedded Toolchain 10.3-2021.10
================================================================================
使用步骤：
1. 编译下载程序到MCU，并运行；
2. PA06引脚接入外部16MHz时钟；
3. 按下用户按键；
4. 可由示波器观察到PA07输出HSE波形（16MHz）。

Example execution steps:
1.Compile and download the program to MCU and run it;
2.PA06 pin is connected to an external 16MHz clock;
3.Press the user button;
4.PA07 output HSE waveform (16MHz) can be observed by an oscilloscope.
================================================================================
注意事项：

Notes:

================================================================================